The second half of the drying process of water damaged homes or buildings should begin by removing any water damaged items from the home like furniture, paintings, photographs, and etcetera and allowing them to dry out outside the home. Squeeze as much water as possible out of couch cushions and try to leave them outside in the sun for as little time as possible, because sun damage can also occur if they’re left exposed for too long.
If the floors of your home are covered in mud or silt, washing them with clean water is usually the only solution. Don’t rush the drying of the floors or what is called warping or buckling and if you can, remove any insulation from under the floor to allow air to circulate. Rapid drying of hardwood floors by using heating, air conditioning, or other forced air to help dry the floors can cause cupping. Completely drying them naturally can take weeks or months.
Any electrical components in the house, like AC outlets, should be replaced if the water level was high enough to damage them. Again, make sure there is no electricity running to that area of your building or even to the entire building itself. When dealing with flooded properties, the possibility of electrocution is great.
Don’t be so quick to remove all the water in your basement. The walls of the basement could collapse due to the ground outside that is still saturated with water and the water still standing in your basement could be the only thing stopping this. After the water around the house has drained away, pump out two or three feet, mark the water level, and wait until the next day. If the water level in the basement rises, don’t continue pumping out the water.
In most cases, washing wet mud away from objects with clean water before drying them is a good idea. Unless it’s an antique item of special significance, this is generally the way to go. If it does fall into the category of antique or historic, consult a specialist as quickly as possible.
Air circulation through the building is essential to drying it out entirely. Heaters should not be used and air conditioners should be used sparingly, if at all. Forcing the building to dry unnaturally can possibly cause even more damage.
Jim Corkern is a writer and promoter of
Texas Water Damage Restoration and
Houston Water Damage Restoration Which are Certified IICRC Water damage and mold remediation contractors.
Saturday, September 29, 2007
Saturday, September 8, 2007
Dangerous Mold in the Desert
It might not have occurred to you, but mold can exist even in some of the hottest climates, such as parts of the southwestern United States. Just because this mold can exist there, however, does not mean that it is not a danger to human beings. People who live in the deserts of the southwestern U.S. might not think that they are in any danger from mold due to the high temperatures and lack of rain, but the fact is that these areas are in just as much danger of mold and water damage as areas that get more rain and have more life-friendly temperatures.
Coccidioides simmitis is a dangerous mold that lives in the western deserts of the United States and causes what has become known as “Valley Fever”. This is a skin disease that can lead to death if it is left untreated for long enough and while this mold is located in the deserts of the southwestern United States and even Mexico, it is oddly absent from the deserts of other continents such as Asia, Africa, and Australia.
The reason that mold damage can be a huge problem in areas of desert such as those of Arizona and New Mexico is that residents sometimes use “swamp heaters” to cool down their homes and offices during the most hot and dry parts of the year. Unfortunately, the downside to these will cause the indoor humidity to skyrocket and condensation ends up building on windows and any other cold surface. Leaks can also occur where water pipes flow upward to the coolers on the rooftops and this can cause water damage to attics, ceilings, and walls.
Water and air conditioning are very important in desert climates and so the possibility of air conditioning condensation leakage and plumbing leaks is pretty high. Air conditioners and fans are used almost constantly and in some places, hot water heaters are not needed during the majority of the year because the water is hot when it comes out of the faucet.
Most of the mold insurance claims in the deserts of the United States are caused by water damage, even though most people think that desert climates do not have enough moisture to cause mold to become an issue. With the presence of the mold that causes Valley Fever in the southwestern United States, if you live in a desert area, you should be extremely careful to make sure that water leaks in your home or business are taken care of very quickly and efficiently.
Jim Corkern is a writer and promoter of quality
Orlando water damage restoration companies and
Water Damage Restoration companies across the united states.
Coccidioides simmitis is a dangerous mold that lives in the western deserts of the United States and causes what has become known as “Valley Fever”. This is a skin disease that can lead to death if it is left untreated for long enough and while this mold is located in the deserts of the southwestern United States and even Mexico, it is oddly absent from the deserts of other continents such as Asia, Africa, and Australia.
The reason that mold damage can be a huge problem in areas of desert such as those of Arizona and New Mexico is that residents sometimes use “swamp heaters” to cool down their homes and offices during the most hot and dry parts of the year. Unfortunately, the downside to these will cause the indoor humidity to skyrocket and condensation ends up building on windows and any other cold surface. Leaks can also occur where water pipes flow upward to the coolers on the rooftops and this can cause water damage to attics, ceilings, and walls.
Water and air conditioning are very important in desert climates and so the possibility of air conditioning condensation leakage and plumbing leaks is pretty high. Air conditioners and fans are used almost constantly and in some places, hot water heaters are not needed during the majority of the year because the water is hot when it comes out of the faucet.
Most of the mold insurance claims in the deserts of the United States are caused by water damage, even though most people think that desert climates do not have enough moisture to cause mold to become an issue. With the presence of the mold that causes Valley Fever in the southwestern United States, if you live in a desert area, you should be extremely careful to make sure that water leaks in your home or business are taken care of very quickly and efficiently.
Jim Corkern is a writer and promoter of quality
Orlando water damage restoration companies and
Water Damage Restoration companies across the united states.
Your Laptop Hates Water
To anyone who owns a laptop, getting a soft drink or a glass of water anywhere near it is probably taboo, but if you are like me, then you probably keep something to drink near by at all times. You’d rather “risk it” than go thirsty, but this does not always have to be the case. While getting your laptop wet in any way can seriously damage it, there are ways to save it if you do happen to spill your drink or anything else onto the keyboard and subsequently, onto the hard drive, and etcetera. Unlike a desktop computer, the keyboard of a laptop is obviously located on top of the most important components of your computer: hard drive, memory, CD-ROM, and etcetera. Without these, your computer will not function.
The problem when you spill something onto your laptop is not with the actual liquid that you spill on it, although things that become sticky after they dry like soda or tea can be a hassle to clean up. The problem lies with the electricity that is running through your laptop at the time you spill the liquid onto it. It usually takes a few seconds for the liquid to get down into the electrical components of the laptop, so the first thing that you need to do if you spill something on your computer is to unplug it and take out the battery IMMEDIATELY. You must remove the electrical current from the laptop as quickly as possible in order to be able to save it.
After you remove the electrical current, the next thing that you have to do is to turn the machine upside down completely in order to keep the liquid from getting further into the shell of the laptop. This will keep it from coming into contact with your hard drive, memory, motherboard, and etcetera. You should allow the least amount of this liquid that comes into contact with those important components as possible, especially if it is an acidic liquid such as soda.
After you have drained as much of the liquid as possible out of it, collect some paper towels or just a normal towel and clean up any of the liquid from the outside of the machine.
At this point, depending on if you got the electricity removed from the unit in time, you could take it to a professional repairman or continue to repair the laptop yourself. The extent of the “repair” could be just allowing the unit to completely dry out or it could involve removing components and cleaning the sticky soda residue from them. Attempting to repair it yourself could possibly void your warranty for future damages, but a professional could be expensive.
Jim Corkern is a writer and promoter of quality
Texas Water Damage Restoration companies and
Dallas Residential Water Damage Restoration Contractors
The problem when you spill something onto your laptop is not with the actual liquid that you spill on it, although things that become sticky after they dry like soda or tea can be a hassle to clean up. The problem lies with the electricity that is running through your laptop at the time you spill the liquid onto it. It usually takes a few seconds for the liquid to get down into the electrical components of the laptop, so the first thing that you need to do if you spill something on your computer is to unplug it and take out the battery IMMEDIATELY. You must remove the electrical current from the laptop as quickly as possible in order to be able to save it.
After you remove the electrical current, the next thing that you have to do is to turn the machine upside down completely in order to keep the liquid from getting further into the shell of the laptop. This will keep it from coming into contact with your hard drive, memory, motherboard, and etcetera. You should allow the least amount of this liquid that comes into contact with those important components as possible, especially if it is an acidic liquid such as soda.
After you have drained as much of the liquid as possible out of it, collect some paper towels or just a normal towel and clean up any of the liquid from the outside of the machine.
At this point, depending on if you got the electricity removed from the unit in time, you could take it to a professional repairman or continue to repair the laptop yourself. The extent of the “repair” could be just allowing the unit to completely dry out or it could involve removing components and cleaning the sticky soda residue from them. Attempting to repair it yourself could possibly void your warranty for future damages, but a professional could be expensive.
Jim Corkern is a writer and promoter of quality
Texas Water Damage Restoration companies and
Dallas Residential Water Damage Restoration Contractors
Subscribe to:
Posts (Atom)
